Rethinking the measuring of innovation

May 5, 2016Posted inAchieving innovation engagement, Advancing innovation, amplifying the innovation signal, Foster Performance, innovation execution delivery, Integrated Innovation Thinking, Polymers7 Comments

Measuring Innovation 1I’m a little tired of the lack of original thinking that goes into measuring innovation. Most trot out the same old chestnuts, including ‘return on investment’ as always, as near or at the top.

Leaders want to hear this, the sad truth is getting a ‘decent ROI’ for innovation constructed (note constructed) is really hard. If the innovation is new to the world, how can it have a clear financial return on investment until much later, much becomes an ‘educated’ guess?

We need to appreciate new innovation balance sheet thinking

Why a balance sheet thinking? There are hard and soft measures to measuring or judging our innovation. It goes way outside financial numbers. Would we have seen the emergence of Facebook, Apple Watches, Uber etc etc if those that were determining success from their investments had actually insisted on guaranteeing the ROI before launch or within short time frames, that many of our established organizations insist upon? No it was the belief and ‘seeing’ the potential that encouraged those investing to make the initial investment and then continue on ‘future’ returns.

Deeper read or quick summary- finding the time

January 28, 2016Posted inAdvancing innovation, Building Innovation Capability, Fresh thinking, Integrated Innovation Thinking, Polymers, Tackling innovation1 Comment

researching_innovation

I recently wrote a post “Delving into a complex world- helping to keep pace”.……to help us to keep pace, learn apply and adapt.

Finding time to read and extend our thinking is a real struggle and going that extra mile to read thought-leadership views can be a step to far, I know but I can’t help myself, it is part of my job and certainly for me, many are really worth it.

In that post I was recommending Deloitte and their thought leadership as a good place to visit.

Now I’m not sure how many of you actually did, so I thought in this post  to pick out specifically two great articles and make a post summary of these, as I feel both of these might be useful, as they challenge and break new ground in thinking.

Constructing Innovation as Value Management

November 26, 2015Posted inAchieving innovation engagement, Advancing innovation, amplifying the innovation signal, Building Innovation Capability, innovation execution delivery, Leading innovation, Polymers, Shifting dynamics in innovation1 Comment

Innovation and ValueInnovation needs to create value, both short-term and progressively over time. It fuels the growth and fires the imagination.
Yet our innovation activities are constantly coming up short for the leaders within our organizations, who continue to remain disappointed in its final outcome to stimulate and drive the growth they want to see.
It is actually the classic “chicken and egg”. Aristotle (384–322 BC) was puzzled by the idea that there could be a first bird or egg and concluded that both the bird and egg must have always existed. Leaders need to lead and are they the chicken, they are the resource for how can the people charged with innovation can lay the ‘golden eggs’ needed, if they are incapable of laying? Or should the innovation egg come first for our leaders to become more confident and build further, believing in innovation far more?
There should be no dilemma we can’t treat innovation lightly anymore, it needs to develop its uniqueness for each of our organizations to evolve. We need both the egg and the chicken to be ‘producing’.
What I’m driving towards here is that innovation is evolving is my 1st point

Risk and Innovation frustrate me

November 17, 2015Posted inAchieving innovation engagement, Advancing innovation, amplifying the innovation signal, Antibodies, Foster Performance, Fresh thinking, Improve Collaboration & Communication, Interests, Polymers, Tackling innovation4 Comments

Managing risk and innovation managementI have been really struggling in the past few weeks.

Partly a niggling health issue finally got resolved with a ‘delightful’ week in the hospital, a couple of operations later, with a reasonably speedy recovery now thankfully underway.

The plan of course was for me to really use this confinement period as one of those opportunities to catch up on an awful lot of reading around innovation, planning out some areas to focus upon in the coming months and year ahead.

My logic was at the time, well this is similar to a long train journey or flight, you use this time and climb into a number of areas that have been quietly ‘festering’ away in the back of my mind, sitting on my desk or tucked away in my computer.

Building the new dynamics into our capacity to innovate

November 5, 2015Posted inAchieving innovation engagement, Advancing innovation, amplifying the innovation signal, Building Innovation Capability, Fresh thinking, Improve Collaboration & Communication, innovation execution delivery, Innovation strategy, Polymers, Shifting dynamics in innovation, Tackling innovation2 Comments

Exploit and ExploreDo we know what are the dependencies and requirements for building and sustaining your organizations innovation success?

How do you sustain innovation, is it more through the structuring of everyday work, by creating a particular set of social rules and resources that foster specific routines? Or something different?

We work really hard at maintaining these re-occurring processes, never willing to extend and push them in different and new ways. We have actually become very static in our approaches and learning, we are not learning anew.

We often simply end up with incremental innovation that might just ‘nudge’ the growth needle but does little more than sustain us in the present and can be ‘contained’ in a tidy process that makes many, including the ‘bean counters,’ very happy until someone changes the game.

Then we need to think differently but this is usually far too late.. As demand is more volatile today we need to experiment, explore, learn and adjust. What becomes more important is the ‘work to be done, and how we go about tackling this and not the work done where we often simply ‘default too. Surprisingly Adam Smith identified this important difference in work way back in 1776.

Opening up our innovation to stay relevant

October 3, 2015Posted inAchieving innovation engagement, Advancing innovation, amplifying the innovation signal, Building Innovation Capability, Foster Performance, gaining innovation momentum, Improve Collaboration & Communication, Integrated Innovation Thinking, Leading innovation, Polymers, Shifting dynamics in innovation, Tackling innovation

Staying RelevantOur whole understanding of innovation is changing; there are numerous shifts occurring.

We are opening up our thinking about where and with whom, to collaborate.

We are evaluating and changing our existing focus from closed (internal orientation) into one that is having a far more open stance. We are searching for more collaborative innovation (external orientation) combining external partners into more ‘collective thinking’.

The shifts taking place are offering us the promise of “extra acceleration” that is needed to improve our innovation performances from concept to market delivery. Or, we hope it is!

Collaborative innovation is also leading us to higher chances of achieving greater impact and success, as nearly all novel ideas lay are mostly outside the organization’s domain of understanding. We need to always bring the knowledge inside and build from it.

As we increasingly include the customer and their more exacting needs within our understanding, these multiple collaborations and dialogues are building this better internal understanding to align our innovation with specific opportunities, relevancy and needs.

Tackling the internal Jobs-to-be-done for improving Innovation

December 2, 2014Posted inAchieving innovation engagement, Advancing innovation, Building Innovation Capability, Foster Performance, Improve Collaboration & Communication, Innovation Ecosystems, Leading innovation, Polymers, Shifting dynamics in innovation, Tackling innovation
internal-frustration
We are constantly nudged toward understanding the needs of customers through the jobs to be done approach to shaping our innovative solutions. So why do we still seem to not achieve this ‘higher purpose’ of providing solutions to customers’ needs?
Predictable growth has run its course as we live in unpredictable times; we need a better way to identify ALL those unmet needs that our customers have.
That need comes from knowing the “job which needs to be done”. We need to sharp shoot to hit clear targets, we need to become a lot more explicit in our knowledge of a customer’s unmet needs, and they need to make the connection of that need with our product (or service).
Mapping the hierarchy of customer needs
We need to map the jobs and generate desired outcome statements that are specific and of real interest to the customer, not our list of multiple ideas generated based on where we are or what we think we know. We need to build a hierarchy of customer needs.
By even attempting to follow a ‘needs first’ approach we are often left to figure out the unmet needs. The flaw lies in not having these fully understood. All needs can be captured but this requires combining a more rigorous, controlled approach, coupled with astute observations.
The key still requires us to accurately quantify the degree to which a proposed solution will increase customer satisfaction – and that means knowing the jobs they want to complete.
We need to segment by jobs and to do this we need to capture this in clear, precise job outcome given statements. We need to become clearer on the product, service or business model ‘job’ it is intended to perform, measured by a customer’s desired outcome.
I really believe our internal processes are letting us down.

Questioning internally those many product failures

November 21, 2014Posted inAchieving innovation engagement, Advancing innovation, Building Innovation Capability, gaining innovation momentum, innovation execution delivery, Polymers, Shifting dynamics in innovation, Tackling innovation
product-failure
There is a variety of different views on our product failure rates. According to some, the failure rate for new products launched for instance in the grocery sector is 70 to 80 per cent in the US. For smaller US food businesses launching new products, the success rate is even lower around 11 per cent.
These are really high failure rates but is this a myth or reality? How does your organization evaluate product failures? Do you really want to talk about them?

Smart, Connected Products Will Radically Alter the Value Proposition.

November 6, 2014Posted inPolymers

Smart connected prize 1Marketing has worked for years in framing the marketing mix on the classic 4P theory of product, price, promotion and place for finding its value proposition, today it is becoming smart by being connected.

Then this was extended for the need to bring in the service aspect, by becoming the 7P,  adding physical evidence, people and process onto the original 4p.

Then this was updated in the nineties to become people, process, programs and performance.

Great as this may be in its  ‘progressive’ evolution these are totally inadequate to ‘serve’ today’s world of smart, connected products. Product design has become hyper, connected and needed to be well-designed. It is more to do with what is embedded or how it is connected and less on the product as the value-generating a proposition.

Getting a deeper understanding of the smart, connected world

The Arrival of the Digital Monsoon for Innovation

November 1, 2014Posted inPolymers

tropical monsoon 2 If you ever have lived in the tropics you know of the arrival of the monsoons.

Skies darken, clouds gather, often thunder and lightning combine, the wind picks up and the rain ‘announces’ its arrival in sheer torrents of heavy, drenching, wave-upon-wave of unrelenting force.

It is hard to stand upright or know what to do. Everything around you transforms. Dry, often parched land quickly turns to rivers of water, seeking out everything to shift and move along and eventually going everywhere to transform the landscape.

We are presently being told we are at the beginnings of a digital revolution; it has been likened to a tsunami in its eventual (devastating) effect on our organizations and by inference, the impact it will have on each of our lives.